- fused cast AZS
- zircon brick
- Refractory ball
- High Alumina Brick
- Fireclay brick
-
Insulation brick
- High quality light weight silica refractory brick
- Light weight refractory insulation bricks JM23 JM26 JM28
- High aluminum poly refractory bricks for tunnel kiln car
- High aluminum poly bricks for blast furnace
- light weight High aluminum poly bricks for heat insulation lining
- Light Weight Mullite Insulation Bricks for Boiler
- Light Weight Mullite Insulation Bricks for Lining
- Refractory alumina hollow ball insulating bricks
-
Refractory castable
- Insulating fireclay castable for aluminium melting furnace
- High purity Calcium aluminate Refractory Cement CA50 CA60 CA70 CA80
- Refractory high alumina castable
- Refractory castable for kilneye
- Refractory castable for coal-injection pipe
- Refractory castable for teriary dust castable
- Refractory Castable for Glass Combined
- Fused AZS ramming mass
- Magnesia Brick
- silica brick
- other materials
- Material & Abrasive
-
Special refractory Brick
- High density Zirconia mullite refractory brick For Glass Furnace
- Thermal shock resistant high chrome brick for sintering kiln kiln
- Magmalox Skid rail block fused cast zirconia mullite blocks for steel industry
- Refractory Purging Plug well block for steel Ladle
- Silicon Mullite Fireclay Insulating Silica Refractory Bricks for stove
- Acid Resistant Refractory Brick for Chimneys
- Refractory chrome spinel bricks
- Refractory Corundum mullite Brick for Key Parts of Ceramic Tunnel Kiln
- Carbon Brick
What factors should be considered in the selection of lining materials for circulating fluidized bed boiler (CFB boiler)?
The performance of CFB lining materials should have the following requirements:
1. The inner circulation vortex type turbulent bed lining requires high wear resistance, high temperature resistance and erosion resistance;
2. The lining of the inlet section of the high temperature external circulation separator requires high wear resistance and high temperature resistance;
3. The inlet of the medium temperature external circulation separator requires high wear resistance and high temperature resistance;
4. Medium and high temperature external circulation separator cylinders require heat resistance, heat insulation and low thermal inertia;
5. Ignition combustor flue requires high heat resistance;
6. The suspension chamber requires high heat resistance, wear resistance and low thermal inertia.