Introduction of carbon mortar
2020-07-21
Carbon mortar is made of artificial high-purity graphite as the main raw material, coal tar pitch, resin, etc. as a binder, and other additives. It is used for electric furnace self-baking carbon bricks and industrial kiln carbon bricks. Product physical and chemical index requirements (national standard): YB/T121-1997
Carbon mortar uses high-temperature electric satin-fired anthracite, graphite and silicon carbide mixed fine powder as raw materials. Resin and additives are anhydrous carbon mortar made of cementing materials. It is used to fill thin joints, mold small carbon blocks, and semi-graphite roasting. The gaps between carbon blocks (bricks) and microporous carbon blocks (bricks), as well as fillers or coating materials with a width of less than 15mm due to the processing of bricks. Adjusting the ratio of raw materials and cementing materials can be used for furnace bottom, furnace shell and cooling stave Press-in material for the gap.
1. Properties and uses: The carbon mortar is made of high-temperature electric calcined coal, artificial high-purity graphite as the main raw material, coal pitch, resin, etc. as the binder, and other additive components to fill the gap between the carbon block and the carbon block.
2. Specifications: Ash content ≤7%; Volatile content ≤42%; Fixed carbon ≥50%; Moisture content ≤1%
Relevant information
-
Silicate fire brick
Silicon thermal insulation refractory brick refers to the thermal insulation refractory products made of silica as the main raw material, with a SiO2 content of no less than 91%. In addition to the heat insulation perfor··· -
silica bricks manufacturing process
1.1 Determination of raw material ratio and particle compositionThe raw materials for making silica bricks are silica and waste bricks containing more than 96% SiO2, in addition to lime, mineralizers and organic binders.··· -
Alumina hollow ball bricks
Alumina hollow ball bricks are made of alumina hollow balls and alumina powder as the main raw materials, combined with other binders, and fired at a high temperature of 1750 degrees. It belongs to a kind of ultra-high t··· -
Anti-stripping high alumina brick for cement kiln
Anti-stripping high alumina bricks are made of high alumina bauxite clinker, mullite, kyanite, zircon sand, and binder first through granulation and powdering processes, mixed in a certain proportion, then pressed into s···