Ceramic honeycomb regenerator
2021-11-22
Introduction of ceramic honeycomb regenerator
The honeycomb ceramic regenerator is the key and core component of the regenerative high-temperature combustion technology (HTAC technology). It has been widely used in various push-steel heating furnaces, walking heating furnaces, heat treatment furnaces, forging furnaces, melting furnaces, ladle/tundish roasters, soaking furnaces, radiant tube burners, and bell-type furnaces in the metallurgical machinery industry. Furnaces, blast furnace hot air furnaces; various ceramic furnaces and various glass furnaces in the building materials industry; various tubular heating furnaces, cracking furnaces and other industrial furnaces in the petrochemical industry.
Material of ceramic honeycomb regenerator
The honeycomb ceramic regenerator made of mullite, cordierite, cordierite-mullite, corundum-mullite, high alumina and other materials has high temperature resistance, corrosion resistance and thermal stability Good, high strength, large heat storage, good thermal conductivity and other significant advantages, the product indicators can fully meet the requirements of the use and operation of industrial furnaces.
Hot body hole pattern of ceramic honeycomb regenerator
Four hole patterns are produced, such as square hole, hexagon hole, round hole and triangle hole.
Application of ceramic honeycomb regenerator
The principle of the regenerative incineration system (RTO) is to use ceramic regenerators to store the heat generated during the decomposition of organic waste gas, and use the thermal energy stored by the ceramic regenerators to decompose untreated organic waste gas, so as to achieve high thermal efficiency. Aiming at the process requirements of the regenerative combustion deodorization furnace (RTO), the honeycomb ceramic products of various materials and sizes such as dense cordierite, loose cordierite, lithium porcelain, mullite, etc. have been developed with large specific surface area and exhaust resistance. Small, low coefficient of thermal expansion and contraction, high bulk density, good thermal shock resistance, etc. This product is widely used in exhaust gas treatment equipment in the chemical industry, automotive paint, spray paint drying equipment, organic chemical industry, petrochemical industry, engraving printing, offset printing, food processing and other industries.
Relevant information
-
Silicate fire brick
Silicon thermal insulation refractory brick refers to the thermal insulation refractory products made of silica as the main raw material, with a SiO2 content of no less than 91%. In addition to the heat insulation perfor··· -
silica bricks manufacturing process
1.1 Determination of raw material ratio and particle compositionThe raw materials for making silica bricks are silica and waste bricks containing more than 96% SiO2, in addition to lime, mineralizers and organic binders.··· -
Alumina hollow ball bricks
Alumina hollow ball bricks are made of alumina hollow balls and alumina powder as the main raw materials, combined with other binders, and fired at a high temperature of 1750 degrees. It belongs to a kind of ultra-high t··· -
Anti-stripping high alumina brick for cement kiln
Anti-stripping high alumina bricks are made of high alumina bauxite clinker, mullite, kyanite, zircon sand, and binder first through granulation and powdering processes, mixed in a certain proportion, then pressed into s···