Instructions for use of high alumina castables
2022-04-11
High alumina refractory castables are synthesized from high-alumina refractory aggregates, powders, binders, and additives in a certain ratio. It has good high-temperature performance, high endurance, a wide temperature range, no shrinkage, wear resistance, and other characteristics. It is deeply used in hardware, smelting, chemical, non-ferrous metal, and other industries, especially in the iron and steel industry, and is mainly used in the front kiln mouth of rotary kiln, disintegration furnace, kiln hood, and other parts.
Features of high alumina castables
1. The construction water consumption is low, usually 6-7% of the refractory castable, so it has high density and low porosity;
2. It has good volume stability at high temperatures. Although high-alumina bricks are non-burning refractories, the volume shrinkage decreases after drying and calcination;
3. Not only has high curing strength at room temperature, but also the strength does not decrease after being treated at medium temperature and high temperature, and the absolute strength is 3-5 times that of traditional refractory castables;
4. The amount of cement is low, and the calcium content in the castable is only 1/4-1/3 of the traditional refractory castable. Thus, the amount of low-melting phase in the low-cement castable is reduced, resulting in a significant improvement in high-temperature performance.
Instructions for use of high alumina castables
High alumina castables are used in hardware, smelting, chemical, non-ferrous metal, and other industries, especially in the iron and steel industry, and is mainly used in the front kiln mouth of rotary kiln, disintegration furnace, kiln hood, and other parts.
The production process of high alumina castables
It is synthesized with high alumina refractory aggregate, powder, binding agent, and admixture in a certain ratio.
Relevant information
-
Silicate fire brick
Silicon thermal insulation refractory brick refers to the thermal insulation refractory products made of silica as the main raw material, with a SiO2 content of no less than 91%. In addition to the heat insulation perfor··· -
silica bricks manufacturing process
1.1 Determination of raw material ratio and particle compositionThe raw materials for making silica bricks are silica and waste bricks containing more than 96% SiO2, in addition to lime, mineralizers and organic binders.··· -
Alumina hollow ball bricks
Alumina hollow ball bricks are made of alumina hollow balls and alumina powder as the main raw materials, combined with other binders, and fired at a high temperature of 1750 degrees. It belongs to a kind of ultra-high t··· -
Anti-stripping high alumina brick for cement kiln
Anti-stripping high alumina bricks are made of high alumina bauxite clinker, mullite, kyanite, zircon sand, and binder first through granulation and powdering processes, mixed in a certain proportion, then pressed into s···