Your current location: Home > Products > Special refractory Brick

Refractory chrome spinel bricks

Refractory chrome spinel bricks are refractory products containing magnesium oxide (MgO) and chromium oxide (Cr2O3) as the main components...
Model Number: hongtai
Minimum Order Quantity:


Magnesia-chrome bricks are refractory products containing magnesium oxide (MgO) and chromium oxide (Cr2O3) as the main components, and periclase and spinel are the main mineral components. This type of brick has high refractoriness, high temperature strength, strong resistance to alkaline slag, excellent thermal stability, and certain adaptability to acidic slag.
Magnesia-chrome bricks The main raw materials for the manufacture of magnesia chrome bricks are sintered magnesia and chromite. The purity of the magnesia raw material should be as high as possible. The requirements for the chemical composition of the chromite ore are: Cr2O3: 30-45%, CaO: ≤ 1.0-1.5%.
Magnesia chrome brick ? Instructions for use
 Magnesia-chrome bricks are mainly used in metallurgical industries, such as the construction of open hearth furnace roofs, electric furnace tops, furnace refining furnaces, and various non-ferrous metal smelting furnaces. The high temperature part of the ultra high power electric furnace wall is made of fused cast magnesia chrome brick. The high erosive area of ??the refining furnace outside the furnace is made of magnesia chrome brick made of synthetic material. The high erosive area of ??nonferrous metal flash smelting furnace is made by melting cast magnesia chrome brick and synthetic material. Magnesia chrome bricks. In addition, magnesia-chrome bricks are also used in cement rotary kiln firing zones and glass kiln regenerators.
Magnesia chrome brick ? production process
Magnesia-chrome bricksThe production process of firing magnesia-chrome bricks is similar to that of magnesia bricks. In order to eliminate the brick during the firing process due to MgO and Cr2O3, Al2O3 or directly combined with magnesia chrome bricks
The loosening effect caused by the expansion of iron oxides to form spinel can also be made into a magnesia chrome brick using a synthetic co-sintered material. In addition, there are non-calcined magnesia chrome bricks, for example, non-calcined magnesia chrome bricks combined with an inorganic magnesium salt solution. The non-burned magnesia chrome brick has a simple production process, low cost and good thermal stability, but the high temperature strength is far less than that of the fired brick. In the late 1950s, a so-called "direct combination" magnesia chrome brick was developed. The brick is characterized by pure raw materials, high firing temperature, direct combination of high temperature phases such as periclite and spinel, and low-melting phase such as silicate is island-like distribution, thus significantly increasing the high temperature of the brick. Strength and slag resistance.
Magnesia-chrome bricksThe method of preparing the fine powder prepared by calcining the calcined billet with chrome ore-magnesia sand and the coarse particles of magnesia is an effective measure for eliminating the loose effect. Compared with ordinary magnesia chrome bricks, the magnesia chrome bricks produced by this method have low porosity, high compressive strength, load softening temperature and flexural strength. Magnesia-chrome bricks made of chrome-magnesia powder compacts and high-temperature calcined synthetic magnesia-chrome sands are better than other magnesia-chrome bricks in slag resistance and high temperature strength.
Magnesia-chrome bricks In addition, there is a molten cast magnesia chrome brick which is directly cast by using an electric orphan furnace molten magnesium chrome material, and a molten granule produced by the fused magnesia chrome material according to the brick making process and a magnesia chrome brick.


Magnesia bricks.jpg

Production Equipment

Production capacity: Our factory actively response to government environmental protection policy, we designed and built the fully automatic controlled high temperature gas tunnel kiln (1700℃), and got capacity of annual output 70,000 tons of high quality refractory products.

Testing Testing Testing Testing
Packing Details
Packing details:

★Bricks: Fumigated wooden pallet with log paperboard covered and stainless steel band strapping, the whole outside is wrapped with thermoplastic film. Or carton packaging.

★Wooden pallet size: usually 92*92cm (standard brick)

★Castable: Ton bag with rain film and 25kg bags inside

★Or according to customer’s requirements


★Port of dispatch: Tianjin port; Qingdao port

★Delivery time: According to customer’s demand or two sides negotiate

Our Services

We provide you 

★Timely response: Timely response to your inquiry within 24 hours and provide solution. 

★Competitive Price: Make the products competitive in your market. 

★Free sample: Free sample are offered, trial order are accepted for quality evaluation. 

★Strict quality control: We set Quality Management System, from the raw material to finished products, produce high quality products according to chemical & physical specifications strictly to satisfy customers’ needs.

★Fast delivery time: Within 3-30 days according to your quantity after receiving your advance payment. 

★ Professional services: Provide pictures from order to delivery. Inspect report by our country’s designated authority and oversea services if necessary.

We are here for you!

Certification:  (ISO 9001:2015)



Please Feel free to give your inquiry in the form below. We will reply you in 24 hours..